Photo of Silver Pulser unit

The Silver Pulser

Ionic Colloidal Silver Generator

and

Plant Growth Stimulator

Generates Ionic Colloidal Silver using .9999 purity Silver Wires, and plant growth stimulator based on research of Dr.Bob Beck

[MODEL #: ZBB4] - NEW Model!!

"First Aid Kit of the Future"

as per the research of Dr. Robert (Bob) C. Beck, D.Sc.


Our design of The Silver Pulser is CERTIFIED, APPROVED and Personally ENDORSED by

Dr. Robert (Bob) C. Beck, D.Sc.


Description International Voltage  Requirements Disclaimer Warranty Cost Ordering Research Info
Other Products
Everything You Need to Know Before You Buy Y2K


What is "The Silver Pulser"?

Full instructions about the use and benefits of The Silver Pulser can be found in the research papers published by Dr. Robert (Bob) C. Beck. For an on-line read of the original Patent # 5,188,738 click here.

Each Silver Pulser is a professionally designed quality device, thoroughly tested on an oscilloscope, and is guaranteed to operate as per the specifications in Dr. Bob Beck's research.

The Silver Pulser is dual function unit being BOTH a Pulser (Plant Growth Stimulator) and Ionic Colloidal Silver Generator.

The Silver Pulser uses only the best .9999 Pure Fine Silver Electrodes. Our Assay Certificate for Silver Wires is on file, and can be viewed by clicking HERE. Our Certificate of Compliance for Silver Wire Purity is on file, and can be viewed by clicking HERE.

The Silver Pulser generates the finest quality Ionic Colloidal Silver at a rate of 3-5 ppm (part per million) in 20 minutes for 8-16 ounces of distilled water, with an Ionic Colloid silver particle size that is mostly ions, with colloidal particles in the range of 0.005 - 0.015 microns (Verified on a Scanning Electron Microscope).

To see independent lab tested results of our Ionic Colloidal Silver as an anti-bacterial solution please click HERE.

It has a Bi-Phasic output frequency of ~3.92 Hertz (cycles per second) at a nominal voltage of 33 VOLTS DC peak per cycle (66 Volts Peak-Peak), matching Dr. Beck's specifications exactly. This device for research purposes only. Before using, consult your professional health practitioner or Medical Doctor.


Unique Features:

The Unit:

Operating Manual for this device in Adobe Acrobat PDF format, please go to our Downloads page by clicking on this link:> )

The Silver Pulser is housed in an attractive "PC-Bone" (Pantone "Warm Grey 1") coloured ABS plastic box, with a built-in compartment for the 9 Volt battery. A slide-off lid allows you to change the battery easily. A Thumbwheel Switch Control Knob on the end turns The Silver Pulser on and off and varies the intensity of the "Plant Growth Stimulator Probe" output. Two flashing Green and Red LED lights on the left-side on the unit indicates there is a correct "Stimulator" output. When these two flashing lights dim or go out, it's time to get a fresh battery. In addition, the two Green and Red LED lights on the right-side of the unit are used for the Ionic-Colloidal Silver generation. Green means OK, Red indicates the conductivity has gone too high.

The Silver Pulser has three jacks, one for plugging in the Fine Silver Wires, another for the GOLD Plant Growth Stimulator Probes, and a third for hooking up an AC-DC Wall Adapter so you don't have to go through batteries. Each of the wire cords are about 6 feet (2 metres) long and are very flexible. We also include Cotton Sleeves to put over the Plant Growth Stimulator Probes for helping to maintain a good connection when moistened. (Hint: Use a Salt Water solution or a conductive gel used on T.E.N.S. pads for better conductivity!)

The Silver Pulser
is packaged in a lidded white cardboard "die-cut mailer" box for easy storage.

Electronics:

The Silver Pulser is designed as per the research by Dr. Bob Beck, and is fully endorsed. We have improved on the design with added features. These changes by no means alter the effectiveness of the unit. Our electronic design is unique and efficient making the unit very portable and light-weight. There's even a provision for adding an external power source to save on batteries, such as an AC-DC Wall Adapter which you can purchase from any Radio Shack® store.

Specifications:

Dimensions:

The Silver Pulser is 2.25" wide x 3.75" long x 1" thick (6 cm wide x 9.5 cm long x 2.5 cm thick). Casing is high-impact ABS plastic. The Silver Wires are 14 AWG (1.63mm or 0.064" dia.) x 8" long (1.5 mm diameter x 20.3 cm long) and are constructed of only Pure Fine (.9999 pure) Silver Wire. Plant Growth Stimulator Probes are 1/8" diameter x 1.25" long (3mm diameter x 3.8 cm long) and are constructed of heavy plated GOLD over SILVER over COPPER.
Weight of The Silver Pulser unit is only a few ounces - very lightweight. Case is black in colour.

Each Silver Pulser comes complete with:


International Voltage (220 or 240 Volt Mains) Requirements:

The Silver Pulser can be operated by an external power source like an AC-DC Wall Adapter, Automobile Battery, or Solar Panel. If you wish to power the Silver Pulser with a wall transformer, your options are:

  1. Purchase the International / Universal Wall Adapter. Please ask for info.

  2. Purchase a local Wall Adapter with: Input 220VAC or 240VAC, 60 Hz Mains, 6-12 Volt DC output, 300mA (milli-amps) or more, Centre Positive, 2.1mm Plug.

  3. Additionally, the Silver Pulser may also be operated directly from a 12 Volt DC Battery like via an automobile cigarette lighter. You will need to purchase an adapter cord which plugs into the cigarette lighter and has a Centre Positive, 2.1mm Plug, like a Radio Shack® #270–1528.


Disclaimer:

Liability Disclaimer to The Silver Pulser owner:

Please understand that we cannot be responsible for any effects - good or bad - believed due to the use of The Silver Pulser. Please read Dr. Robert Beck's research papers before using this device. This device is for researchers only. Not intended for use on humans. Before using, consult your professional health practitioner or Medical Doctor.


What about a Warranty?

The Silver Pulser has a full 3 Year Parts and Labour Warranty on all internally mounted components. New Silver Wires, and/or Plant Stimulator Probes can be ordered through us.


How much is "The Silver Pulser"?

$175 US Shipping is included within North America

Please visit this new site for the current model:

Bob Beck Pulsers << New Bob Beck Site

or

$220 CDN (plus applicable taxes) Shipping is included within North America

Please contact us for International Shipping Charges, Rates, and Options

All purchases include a complimentary subscription to the newsletter from Teslatech.

Our Policy at Teslatech:

"We encourage you to educate yourself before purchasing any of our units. When ill, it's easy to make a decision in desperation rather than based on information."

"We are a company that believes in self-responsibility for ourselves and our customers. Once you purchase and use our units we cannot take responsibility for your decision."

"If, however, the unit has not been used at all, we will refund the full purchase price within 30 days of purchase."

"Thank-you for your understanding."

Please note: Personal cheques will be held for 30 days to allow funds to clear.


How can I Order "The Silver Pulser"?

Please note:
If you are ordering by FAX, E-Mail, or Mailing us a Money Order please remember to include the following important and necessary information so we can process your order without delays (especially International Orders!):
Your Full name and street address. (Remember, couriers will NOT deliver to PO Boxes.)
Telephone Number and, if available FAX Number. (Couriers MUST have a Telephone number, or they cannot deliver. And we need a way of contacting you should there be a shipping problem.)
Your E-Mail address if applicable (especially International Orders), so we can contact you easily should there be a shipping problem.

   

Please note: Personal cheques will be held for 30 days to allow funds to clear.
Call us for more info at (541) 434-0318

Or:
Tel: 1 + (541) 434-0318

Fax: 1 + (541) 434-0318

For inquiries/orders write to:

Teslatech,
1430 Willamette St #202
Eugene, OR, 97401

Or e-mail to mail@teslatech.com

NOTE: This is NOT a secure page. Please DO NOT e-mail your credit card numbers or other sensitive data. Thank-you!


Where can I get more information on Dr. Robert (Bob) C. Beck's research?

There are available AUDIO tapes as well as VIDEO tapes of lectures given by Dr. Beck. Please email for info. More will be posted soon.

NOTE: For Researchers this information is essential to explore the alternative uses of The Silver Pulser.

For a complete local on-line read on Bob Beck's research click HERE.

For an on-line read of the original Patent # 5,188,738 click here.

For a look at Dr. Beck's two original (but dated) schematics click HERE and HERE.


Other Interesting Alternative Health Products:

Please click HERE for Teslatech's current Products...


Everything you need to know before you buy...

Please click HERE for information on what you should know before you buy...


Y2K (The Year 2000)

The Silver Pulser is fully Y2K compliant. In the event of a power outage here are some options for powering the Silver Pulser other than normally with its 9 Volt Alkaline Battery:

  1. The Silver Pulser may be operated directly from a 12 Volt DC Battery like via an automobile cigarette lighter. You will need to purchase an adapter cord which plugs into the cigarette lighter and has a Centre Positive, 2.1mm Plug, like a Radio Shack® #270–1528.
  2. The Silver Pulser can be powered by a suitable solar panel. Keep in mind that most solar panel generators are used to re-charge a battery which in turn operates the device. Therefore we suggest you use a solar panel to re-charge a (preferably a sealed Gel-Cel® type) 12 Volt DC automobile battery, then run the Silver Pulser directly from the battery. You will need to use a cord which has alligator clips on one end to attach to the battery terminals, and the appropriate Centre Positive, 2.1mm Plug on the other end to plug into the Silver Pulser. Be careful with polarity! This type of cord with alligator clips on one end is probably not readily available, therefore you will to need to buy a cord and cut off the end that normally goes into the cigarette lighter, and solder your own set of alligator clips. Use a black and red alligator clips so you ensure polarity is correct each time you connect the circuit.
  3. If you wish to operate the Silver Pulser directly from a solar panel you will need to use a 12 Volt DC output panel that is capable of supplying at least 1 Amp. The Silver Pulser's initial starting demands may require a higher output solar panel. That is why it is preferable to use a charged 12 Volt DC battery instead.

Top of Page